I have never found a spring-form pan that does not leak.
I have never been able to wrap a spring-form pan so that some of the water doesn't get into the pan.
I can wrap it so that a lot of the water doesn't come into the pan.
But it seems to me that there must be a method that works to keep the water out entirely. I just haven't figured it out.
How can I wrap a spring-form pan in foil so that water from the bath doesn't leak into it?
Best Answer
If you have 18 inch wide heavy duty foil, pull a square that is 18X18, place your pan in the center of the foil and lift the edges of the foil up around the outside of the pan, effectively making a pan within a pan (spring form inside the aluminum foil pan.
If you only have 12 inch foil, pull two pieces of foil about 18 inches long and put them on top of each other. Along one if the long edges, fold both pieces over about 1/2 inch a few times, crimping each time. Open up the sheets which will create one large piece with a seam down the middle. Put the spring form pan in the middle like above. If your seam is tight it should work as well as the single piece of 18 inch foil.