Coffee – How to remove small grounds when using a french press

You do want a coarse grind for french press coffee. The key is letting the coffee steep for long enough to make a strong brew. I have good results with a 5 minute steep time. Be sure to use a timer, and compare different times to find the optimal brew. As a general rule, if you are at altitude, then you need to add time because boiling water is cooler. (Note that I am at 5000ft, so 5 minutes may be too long for you.)

Below is a picture of the coffee chunks in a coarse grind on top of a US 5 cent coin (21.21 mm in diameter).

The picture is from this article.

EDIT: The reason to use a coarse grind for a french press is that finer grinds will get stuck in the filter and/or push their way through. This has three potential problems: 1) it will be harder to press down the filter, possibly leading to spillage or breakage; 2) your coffee will have grinds in it; 3) the coffee may become bitter, as the finer grinds that passed through the filter remain in contact with the coffee for too long.

I have a small sieve (like the one pictured) that I use for this purpose and it is very quick and easy. Slosh water in the press, pour through the sieve and dump grinds in the trash!