How to look for in a crepe pan

One of the most important things is a full tang. The tang is an extension of the metal of the blade into the handle. In knives with a full tang, it goes all the way through the handle. This improves stability, control, and durability. Cheaper knives with partial tangs will have the handle break off over time.

In a chef's knife, you want a blade from 8 to 10 inches long, whichever is more comfortable.

You can also either get a forged or stamped blade. I suggest reading this article on the differences. To summarize, forged blades are softer, easier to sharpen, heavier, and have a bolster. Stamped blades are sharper, harder to sharpen, lighter, and have a welded on a bolster if any. With current manufacturing processes forged is not necessarily better than stamped. You should make your own decisions. All crap knives are stamped, but not all stamped knives are crap.

This brings me to one of the most important points: It must feel good in your hand. Don't buy an expensive knife just because it's expensive, or you recognize the name. Go to a store that will let you use the knife, Williams-Sonoma will do this. If you can, bring a carrot in your pocket and actually cut that in the store.

_{I'll do some research on steel quality and update this later.}

I suggest getting a quality stainless clad saute pan or saucier. For years I made risotto in the All-Clad 3 qt. saute pan shown here:

Unless you're serving huge portions this is plenty of room for 6 servings of risotto. There are larger options available though, including a mammoth 14" 6 quart one.

This pan easily does 90% of the work in my kitchen, so at any price it carries its weight in the kitchen.

That said, this past Christmas I got the All-Clad 3 qt. copper-core saucier shown here:

It's a very close matchup, but this pan is perfect for making risotto. The higher sides are a definite benefit, but you don't sacrifice much in flat surface area. The copper core is amazingly responsive, noticeably more so than aluminum. It's obviously rather expensive, so if you're uncomfortable spending that much on a pan I'd suggest getting one of their regular 3 qt sauciers -- you'll spend at least half as much.

If I only had one pan in my kitchen though, I think I'd still go back to the saute pan above. Its versatility is just unmatched.

Regarding your concerns that a wider pan won't heat as evenly, this is generally true for a cheaper pan. However, All-Clad pans use magic to bond a layer of aluminum (or copper) between a layer of magnetic stainless (exterior) and 18/10 stainless (interior). The end result is a very even heat which you can actually confirm with an infrared thermometer.