Lamb ribs – how to cook them

You want the ones that look like little tiny T-bone steaks. Typically they are called Lamb Chops, but look first as there are different cuts under that name. You might also consider doing a rack, which is the equivalent to a Rib Roast, but obviously much smaller. For the rack, I'd sear it in a pan, and then broil it until done. (15-25 minutes, 140-160 degrees).

Even given a standardized recipe and method, cooking times are always only a guideline. Quality recipes always give you a test for knowing when the product is done.

The reason for this is that there are many uncontrolled (at least from the recipe author's point of view) such as, in the case of ribs:

• Exact dimensions of the ribs
• Natural variation in the composition of the ribs
• Starting temperature
• Variation in your particular oven

That said, the variable most controlling over the time it takes to cook ribs, given a standard recipe and method, is the thickness of the set of ribs. A longer strip of ribs (btw, the full set of ribs on one side is called a slab of ribs—country ribs are not normally sold this way) doesn't make much difference, as the heat will penetrate through the thinnest dimension.

Ribs are a complex food to cook as they benefit from low-and-slow cooking methods, which allow the touch connective tissue of the ribs (collagen) to slowly convert to unctuous gelatin. This conversion is temperature dependent, taking many, many many hours at around 140 F, but happening in an hour or two at 180 F.

Note also that country style ribs are a different cut than back ribs (the baby variety come from a younger, smaller animal). Country style ribs are cut with a lot of meat on the bone.

In practical recipes, the amount of time this takes will depend on the exact cooking method such as braising, roasting, or barbequing.

Recipe request themselves are off-topic here at Seasoned Advise, but you can find many recipes easily by googling "country rib recipe". Indivdual recipes will give you a guideline for a basic cooking time related to the method used in that recipe, and a test or condition for knowing when they are done.

For example, this recipe for braised ribs from the Food Network suggests an estimated cooking time of 1 1/2 hour braising, and tells you that they are done when when the meat is tender (which you would test by poking with a fork, or just trying some).

An alternate method, as suggested in this recipe from Cooks.com is to roast the ribs in the oven. They use three-stage method where the ribs are covered in foil in the middle stage, but the total cooking time is about 3 1/4 hours. They carefully describe how you know when the ribs are done: "the meat should just about fall off the bone.".

Note: I haven't tried these particular recipes; they only serve as examples.

The bottom line is, ribs are generally done when they are quite tender, which you can easily tell by poking them with a fork or trying them. How long this takes will depend on what method you used, the size of your ribs, and a myriad other factors, but will be on the order usually of 2-3 hours.