Oven – Lodge Dutch Oven seasoning fail (My first cast iron experience)

I personally had never heard of it, but after doing some research online, I found another set of instructions that called for boiling potatoes in the pan before seasoning:

After boiling potato peelings for 15 minutes, the skillet had a nasty slurry of grey looking sand in the bottom Once the skillet was heated, the pores were opened, and the starchy/water mixture was able to draw out oils and dirt that I was not capable of getting to through normal washing. I fully do not understand the science behind why the starch/water mixture did this, but the experience was enough to convince me of the need to do this. So much in fact, that I did this process twice on each skillet.

I read a few too many web pages while researching this, and didn't save all of the links, but I did notice a few things:

1. Some of the posts kept switching between saying cast iron and carbon steel; both are typically seasoned, but they're different materials, so I don't know if it's recommended for both, or if people were mixing things up. (I only have one carbon steel item, a wok, which I got second hand, so had already had its first seasoning).

2. Some of the posts mentioned boiling potatoes for 15 minutes, other mentioned frying potatoes as the first thing to be cooked in the pan (in oil), some mentioned cooking them 'til they burn. The boiling potatoes ones also mentioned it works for cleaning stainless steel pans.

3. Some mentioned peels specifically, others say that you can use any part of the potato ... if it's the starch that's of interest, I'd think the middle would actually be better, but I'm guessing that the peels were considered waste, and so considered a less valuable item; I'd be inclined to just use one potato, dispatched with a peeler, if you were trying to avoid wasting potatoes you weren't going to eat.

You may notice the black residue if you fry eggs in the pan as well.

Most likely, the black residue is charred (greasy) food sticking to the seasoned oil. Since Flaxseed oil has low heat tolerance, it could be that disintegrating, too. Otherwise it could be related to the iron in the cast iron which isn't bad for you (some say even good).

a) Is it normal: Yes if you keep with the same regiment (recommend you don't).

b) What is Wrong: Water won't perfectly wash non-polar chemicals such as burnt solids in grease (milk solids while making ghee), so the hot water no-soap routine leaves the stuff in pan.

c) How can I fix it: Try the following going forward:

• After you finished cooking and while the pan is somewhat hot, put a heap of salt in the middle and with a paper-towel spread and lightly scrub the pan. The salt will pick up the would-be black stuff, largely disinfect the pan, and the abrasive properties of the salt helps with the cleaning.

• Wipe off the now brown salt from the pan and rub-in the coat of oil as you normally do. The new coat will stick better to through the salt's abrasive effect.

This routine won't eliminate residue altogether. But it seems to work great long term.

Note on oils: Flaxseed oil is best consumed cold and within three weeks. I haven't heard of a credible source promoting seasoning the pan with flaxseed oil as it has one of the lowest smoke points in the oils. Use a more heat tolerant oil like light (not extra-virgin) olive oil or canola.