The two tools I have used to make my own pasta are rollers and extruders.
The extruder sounds similar to the pressurized tool you described above. It uses an auger like a meat grinder and produces round pasta like spaghetti. Shells and macaroni are also made by extruding. The material that the die is made from with affect the texture of the pasta surface. The one that I used was an attachment to a stand mixer and costs ~$100.
Pasta rollers have a couple precision rollers with variable spacing for forming the pasta and a set of cutters for slicing the pasta into linguine. There are various sized cutters- my cutters are just one size. The rollers are also a fairly simple machine and can be powered, a stand mixer attachment, or rolled by hand which I have. My hand cranked rollers cost ~$50 new.
Rollers are easy to get used because they are the kind of thing that people get for wedding gifts and never use- like yogurt makers. I got mine unused at a garage sale for $5. This bit of information may not be applicable to you in Germany. :)
The best advice I can give is that you're not going to want to use full power very often. I find that food tastes much better if you cook it for longer at 60 or 70% power then if you blast it quickly at 100%. This is especially true for proteins like chicken. I guess this allows for slightly slower, more even heating without destroying all the water in the food. The extra minute or two of time is worth the huge difference in the final texture.
I find that pretty much any vegetable or rice-based dish will reheat "ok" in the microwave, because of the nature of the microwave itself, which works very well for steaming. When reheating stuff like this, throw a tsp or Tbsp of water in the container, and place a lid on it (but do not seal the lid, you want it vented slightly). Again, stick with less than full-power.
I know someone who swears by boiling a glass of water in the microwave first to fill it with moist, warm air. Supposedly it helps with evenness and faster cooking, and reduces drying out the food; I don't know if I buy it but thought I'd mention it so you and the community can comment/decide. I understand the idea, but feel like you'd lose so much of that just opening the door to swap the water for your food. If you do go this route, it's very important that you understand superheating water, which is dangerous. Don't try to boil water in the microwave without reading that link.
If you're adventurous, there's a line of Corningware Microwave Browning products (scroll about halfway down the page where it mentions browning) - I was given one a half a year ago and was surprised at how well it works. There's a lining of microwave-safe metal (I believe tin oxide) inside the bottom of the casserole/skillet, and you heat the casserole by itself for a minute or two first which gets that blazing hot. When you drop food on it, it actually sizzles, so now you're using a combination of normal microwave cooking and direct, skillet-like heat. I've had a lot of good luck reheating things like pork chops and keeping/adding a crust to them.
Also, there's a book, Microwave Cooking For One, and an accompanying website, that are both supposed to be really useful. I don't own the book but have heard from friends who do own it that you can learn a lot about general microwave use from it - even if you don't plan on cooking from "scratch" and are just reheating leftovers.
All that said, I completely agree with Jefromi's comment. 90% of the food I reheat is reheated in the toaster oven, either preheated like a regular oven, or under the broiler depending on what the food is. You might take an extra 5 or even 15 minutes to reheat this way, but the difference is unbelievable, and the convenience is still the same - I just put whatever I want to reheat into a casserole dish and throw it in, sometimes covered, sometimes not. So, cleanup still only involves one dish, and you can eat directly out of it (though it will be very hot, so be careful!) Once you get into the habit of using the toaster oven, you'll find a way to make up for the small amount of extra time - for example I often I empty the drainboard while it preheats, and wash dishes or something similar while the food heats up.
Best Answer
In college, I would oil the pasta lightly after cooking (so it didn't turn into a giant lump), then would steam it 'til it was warm, and add it to hot sauce. I was typically working with linguini or other strand pasta. I'd start it in the steamer for a bit, then turn the mass over. As it softened up, I'd lift it with a fork or tongs to re-distribute it, and try to break up any lumps.
These days, I'm more likely to use a microwave than steaming.
You can also portion it out into oven-safe containers w/ some sauce, maybe a cheese or breadcrumb topping, and reheat it in the oven. This works well for any size/shape of pasta (although I admit I've never tried angel hair or similar size, as I hate cooking them). Reheat covered at 300 to 350F, then once the middle is warm, uncover and brown under the broiler