I see a submersible pool cover pump such as the following advertised, and I am puzzled with several questions.
-
The power cable will be going into a large pool of water. I assume that the power cable is sheathed with PVC. How can PVC withstand a few months in the open? Isn't there an inherent risk (certainty, in the long term) that it will develop minute cracks? If that happens, wouldn't it be inherently risky?
-
The pump is indicated to be 3 lbs. That seems to be a lot of load to put on a vinyl cover. Wouldn't that weight resting still for at least six months over one spot cause the pool cover vinyl underneath to stretch or even possibly rip?
Best Answer
There are three reasons why you need not worry:
UL/CE rating
I think you will find it is UL or CE rated I know with UL the items are tested and abused like any home owner would, not as sure about CE but some equipment I helped build to send over the pond had 3rd party inspectors checking every part to make sure it could be CE compliant. The pump should have a GFCI plug this would limit any potential shock if the cord were to fail. I would think the plastic pump impeller would fail before the cord even with 5/6 years outside.
Connection
Should the device be faulty, you still need not worry too much. You will deposit it in your sitting pool of rain water, while it's not powered. You'll walk to connect the power cable (hopefully your outdoor power is a GFCI one). While connecting the power, you'll not be close to any water.
Weight
The vinyl tarp can already handle a column of water 2ft (maybe) high. If you calculate the distributed weight of the pump on the (usually large) base, you'll find that the psi on the tarp will be in the same ballpark as the column of water.
Just as importantly, you do want the weight of the pump to push a little on the tarp. That incline will drive all your rain water towards the pump so all the water reach it.