Basement – permanently remove and fill-in below grade windows in multi-family building. What’s the risk

basementventilationwindows

I have a 5 family apartment building in NJ. There are 2 below grade window wells that protrude from the building and into the asphalt driveway. I want to fill these in permanently with concrete because the windows leak like crazy, and the wells are huge hazards (for tripping and the metal grates have caved in several times when someone drives over them).

What's the risk over filling them in?

The basement is unfinished. These 2 windows do not open. There are 2 other window on the opposite side of the basement that do open (and are not a problem). Also, the tenants do not have access to the basement. The only people who go down there are myself and the meter readers. It's a full basement with 5 boilers, 1 hot water heater, 6 electrical meters and 6 gas meters.

Thanks!

Best Answer

Depending on the size, weight would be my only structural concern. A large window well filled only with concrete is going to weigh a ton. That could potentially put unwanted pressure on the foundation.

The windows should be blocked/bricked in, add some below grade sealer/barrier (whatever the foundation of the building is made of), the hole filled with dirt and the top paved over to be part of the driveway.

All that said you should also call a building inspector BEFORE you start work to ensure that blocking in those windows isn't violating code...I doubt it will be a problem...but yeah, ask first in this case.