We have a 24'x14' detached pergola that was custom-built for our yard. Every year, we put up a large canvas canopy in the spring, and take it down in the fall. It's a perilous experience each time, and the canvas is starting to show signs of wear.
I'd like to consider putting in a more fixed roof on the pergola. I'm very new at this stuff, and will need to rent/acquire the appropriate saws if I go about this project on my own.
Photos of the column/beam/rafter joints:
The layout of the columns, beams and rafters is as follows:
Can my pergola with a roof support snow weight? I live in Chicago, and it can snow (and collect) up to 36 inches here, for days/weeks at a time. I think the pergola footings are in concrete, but because everything was covered by composite boards, it's difficult to say fo sure.
How to build a slope, easily? I believe, with any solution I go with, I'd want to first create a slope. I have been reading about/watching videos about shimming. It seems like I'll need to create my own shims that run east to west. Not challenging, but it will require more equipment and more time to complete this job.
What material should the roof be? I was looking at corrugated sheets and polycarbonate like Polygal. If others have recommendations, I'm all ears.
Is there anything I'm missing?
Best Answer
I looked up minimum snow loading in Chicago and for an open air, no snow drift potential, <15deg sloped roof you need to account for 20psf.
I work at an architectural/structural company in Ontario, Canada and our minimum psf for snow loading is 25psf. You would need 4ply 2x8 as the beams since they can span the 137" carrying the required joist span and snow loading.
You can most likely use the 3.25"x3.25" framing as they would be comparable to 2x4s at 1' oc which can span 8.1' max. Your required span is 8'6" minus the size of one post. 16" oc is likely not a problem either due to the fact that each joist is essential 2-2x4s.
As isherwood said though you need to either have the beams resting on top of the posts or they need to use appropriate hangers. You should also add angled bracing at the posts and beams secured 2' away from where the posts and beams meet.