Looking to install a C-wire for my power stealing nest. I have 5 wires up at the thermostat and same at the boiler. I am using red and white at the thermostat however it looks like blue and white it’s being used at the boiler. enter image description here
See below.
enter image description here
Best Answer
The soldered C terminal is labeled on the transformer board. To confirm you should be able to follow that wire to a ground terminal. You might have to cut and splice that wire.
That being I'm not convinced from the blurry diagrams that the standard furnace wiring setup will work with your boiler, after connecting the C wire you may need to connect the R from the boiler transformer board to the Rc terminal on the nest and use the Rh/W1 on the nest as dry contacts for the two wires currently connected to the old stat.