Please forgive the quick sketch for the concept, but I'm wondering if the following is prohibited by code, or failing at that, a bad idea in general. I have a small (6'8" x 9'3") bathroom that needs to be renovated. Since there is only one bathroom in the house I've been told that having at least one bathtub is mandatory for resale purposes, but I would like to have a walk-in shower that does not require stepping over a tub wall to enter. Can an alcove (or another option) tub be installed in such a way that most of the tub is behind a wall, or is this prohibited by code?
Best Answer
Alcove tubs are designed with flanges, or lips, on the 2 short ends plus one of the long ends. The purpose of these flanges is to create an edge that the tile and backer board should cover, ensuring that water drips on the wall land on the tub.
Your design won't suit an alcove tub.
However, you can install a 'stand-alone' tub and use a tile gasket seal around the edges that are to be water tight. The gasket is a clay like substance. You put the gasket in place and mold it to fit, then drop the backerboard on top of it to create a water tight seal between wall and tub. Once the backerboard is water proofed you are good to go.
That said - the layout will be very awkward for getting into and out of the tub with this design. I'd encourage you to reconsider.