Caroma smart toilet isn’t filling

It seems as if you have an obstruction that may be floating around in the pipe or valve. Sometimes it obstructs sometimes it flows clear. I would start with changing the water valve. If this is the old style "gate" valve there are several things that can clog the line. I would replace it with a 1/4 turn ball valve. That will give you much better flow than a gate valve. You will need to shut down the water probably at the main. The old valve is probably soldered, but you could cut it off and use a compression type valve instead. "Sharkbite" is one such supplier. Although I have never used their compression valve, I have used their end caps and found them to work well.

If you can have someone hold a bucket under the pipe once you cut off the valve and then a second person turns on the water main to fill the bucket to purge the line of any debris. With cast iron pipes it is common to get clogs from rust build up. The rust may not pass the small opening in the old gate valve when you first purged the line.. Although you did not mention what type of pipes you have, if it's copper than you won't normally find rust obstructions..

Don't worry, dual flush toilets aren't any different. It sounds like your Fill Valve (the tall thing on the left) is on its way out. You can do a new one with just big pliers & you'll need to replace the water hose from the wall to the toilet. $30 & 30-minutes, at the most, should get you back to normal. Or, call Roto Rooter if you don't do that stuff. It's common but not too predictable, every 10-years is a good preventative rule.