I am getting vibration through my pipes after flushing, it is also very slow & I am finding cement pellets at the bottom of the pan
Causing the vibrations through the water pipes after flushing the toilet
toilet
Related Solutions
Can you locate the noise (tricky because I am sure it is also traveling along the length of the pipe)? Is it coming from a particular wall? It could be a loose pipe that is moving a little (only when water is running through it) and hitting something.
It looks like you are missing your fill hose. There should be a hose connecting the outlet at the top of your fill valve assembly running into your overflow tube:
Related Topic
- Should I be concerned if the toilet water level drops after a flush
- Plumbing – ilet water disappearing after neighbor flushes toilet
- Toilet occasionally runs shortly after flushing
- Toilet weak flush. The water in the bowl swirls, but it didn’t flush stuff into the pipe
- High water level in toilet bowl after flushing
- Water heater working when flushing a toilet
- Plumbing – Why would turning on/off hot water when the toilet is flushing cause the tankless pressure relief valve to release water
Best Answer
Could be that the float/valve is causing this. If you flush the toilet and hold down the float, then let go when the tank is full (you might have to pull up on the float to close the valve quickly), do the pipes vibrate? If not, replace the valve assembly. If there is still vibration I'm not sure what else could cause this (except if the tank value didn't close all the way) because there's no other active valve in the system at that time. For just $5, replace the valve assembly.