I am replacing a ceiling fan+light unit. It is controlled by a on/off switch for the fan and a dimmer switch for the light unit. From the ceiling I have a bare wire, black, white, red wires. The fan has a white, black, blue, and green wires.
Ceiling – how to Replace a ceiling fan with dimmer switch for lights and on/off switch for fan
ceiling-fan
Related Topic
- Electrical – Trying to install a dimmer switch for the light attached to the ceiling fan
- Wiring a ceiling fan with black, white, red, green in ceiling box and two wall switches
- Electrical – Remove ceiling fan/light combination replacing with a light and remove 1 of 2 switches that controlled the ceiling fan
Best Answer
I,ll describe the process of elimination that ThreePhaseEel describes.
First, you connect earth to earth, because it's a world standard that green, green/yellow, or bare is always earth. So that's easy.
If neutral is present, it must be white. Neutral must by nature be present on both sides here, so the whites must be neutral. Connect them, done.
That leaves two colors from the wall and two from the fan. Colored wires must be hot. There are only 2 ways to hook them up. We're not sure, but it won't be destructive to try one way and see.