I have a Kitchenaid cooktop model KECC567 (5 burner model) with a 2 element burner that will not cycle on or off no matter what control switch setting is used. The 2 elements of the burner stay on continuously when the dual side is selected as does the single element when it is selected on the switch. I have replaced the infinite switch but the problem still exists. Appreciate some suggestions on resolution of this problem. Has to be a temperature sensor but don't know where to look for it. Thanks
Cooktop burner cycling on and off
stove
Related Topic
- Stove Burner Gets too hot? But not switch
- Why does one stove top burner spark the other and vise versa
- Oven has power, preheat light is off, but no heat
- Could a faulty stove burner trip the circuit breaker
- Electrical – Could stove element be powered through fan switch
- Gas range top burner – fuel line blocked between valve and burner orifice
Best Answer
This is for future reference in case anyone is looking for similar information. The OP noted in a comment that
So, it should indeed cycle
P.S. Marking this CW since it isn't really my answer.