deadboltdoorstrim
So I have an outside door w/ a deadbolt. Someone left the deadbolt extended but the door open and went to shut it and as a result the deadbolt dented the heck out of my interior door trim (inswing door).
What is the name of, and where can I procure, a "plate" that I'd install on the inside trim to protect from deadbolt strikes?
You'll have to remove the dead bolt and thumb turn mechanism in order to inspect it. It could just be gummed up in which case it needs to be cleaned and lubricated, but also common is someone forcing the lock and bending a component. If bent, you can try and straighten whatever is bent with a pair of pliers, but if it bent that easily it is probably a low-end deadbolt in which case it's probably better to replace it. A locksmith can key a new deadbolt to your current key if that is a concern. There might also be debris lodged in the mechanism which can be removed.
First thing you need to do is find the set screw that releases the inside handle. then you pry off the escutcheon plate (trim plate). the two screws you are looking for are under the trim plate.
Best Answer
How about a door edge guard? These door edge guards are constructed of solid brass and come in a variety of different finishes. These door edge guards are used to protect the door trim from being dented or damaged by swing bar type locking hardware. They feature an adhesive backing that provides for a quick and easy install, together with the assurance of a strong and permanent hold. These types of edge guards are designed for use in both residential and commercial applications.
You can get them at Walmart or Amazon.