Door Repair – How to Fix a Hole in a Hollow Door

doorsrepair

My son sometimes has a temper, and has been known to hit his door when sent to his room. He has actually done so enough to punch a bit of a hole in it. I'm trying to figure out what might be doable to fix the door. Here is a photo of it:

enter image description here

As can be seen, there is a crack on the left that is visible and slightly dented in, and the center/right hole is actually pressed in pretty good. The punched hole is approximately 6 inches in diameter.

I'm going to make my son pay for the repairs from his allowance, and as that is limited, I am hoping for a fairly quick/inexpensive solution.

Any ideas as to what can be done?

Best Answer

Another option is to laboriously fill in the dent with spackle, layer by layer, and then carve in a matching 'grain' with a paperclip or other such tool in the topmost layer. Then repaint, and it'll look fine.

This would take time and patience (each 1/2" layer needs to dry for a while), and be an excellent learning experience for SOMEONE.