I have an exterior lock set with a knob on the inside. I can't get the interior doorknob off. It does not have a hole in the shaft of the knob in which you press a clip down to remove it. It's one of those where you pull the cover plate back away from the door and rotate an inner plate in the direction of the arrows. After I rotate the inner plate, what do I do next to remove the interior knob and the plate on the door. The interior plate is loose, so it seems to be out of its "Locked" position, but will not come off. I believe it's a Schlage lockset. It came with the house and is 22 years old.
Doors – How to remove a doorknob with no visible screws
doorslock
Related Topic
- Doors – Why can I no longer turn the knob of the self-locking door from the inside
- Doors – How to remove the interior side of a Kwikset handle set with “interconnect”
- Doors – How to unlock a locked interior door
- Doors – Is the doorknob handleset installed correctly
- Doors – Latch bolt stuck inside door jamb
- Doors – Doorknob sticks if door closes hard
- Doors – How to remove this door knob and plate with no obvious screws
- Doors – Ensure that a closed door is a completely locked door
Best Answer
post a pic . sounds like a kwikset titan and if it is you rotate cc about 15 deg and it should pop off. may be an old corbin where there are 2 rectangles at 12 o clock and six o clock. push them away from the latch with and the knob will literally pop off.