I have an old mortise lockset that I want to replace. And I already removed all the visible screws and the cylinder. However, I am not able to figure out how to remove the knobs. I could loosen the cover a little bit and I saw a "half" screw head on one of the knob. Posting some pictures here as well.
Doors – How to remove this door knob on the mortise lockset
doorslock
Related Topic
- Doors – Removing a Schlage door knob with stripped screw heads
- Doors – How to do about a screw jammed in the deadbolt
- Doors – How to remove the interior side of a Kwikset handle set with “interconnect”
- Doors – How to remove this broken latch and handles
- Doors – Ensure that a closed door is a completely locked door
- Doors – How to remove the rest of this lever-style door handle
- Is it easy to convert a cylindrical to mortise lock, or should I just install a deadbolt
Best Answer
There should be a catch release hidden on the underside of the inner knob. Push in, hold, pull knob out with your 3rd hand.
If you don't care about the knobs you can be lazy and just cut/bend/crush the escutcheon plate to get to the screws.