doorsreplacement
I found the inside handle like this today. My housemate and my wife have professed ignorance on how it got that way. As a result of the handle getting cranked about 20 degrees from horizontal, the latch no long allows the door to close all of the way. Would I just be replacing the inside assembly? Inner and outer handle? The entire door?
A door magnet latch like this will work. If the wind is heavy, use more than one.
If anyone still needs help with this, i finally figured out the right way to remove this type of interconnected lock set. Thanks to Locksmith Ben, who was kind enough to help me on face time :)
There is a tiny square shaped pin, which was spring loaded. i had to push it upwards and pull the knob out.
Here is an annotated picture of my lock
Here is the OP picture I annotated.
Best Answer
You can go to places like Home Depot , Lowes, Ace hardware, or any large hardware type store, show them the part a they should have what you need.