My garage door opener will not close , I get the 10 flashing light signal. I have eliminated the sensors as the culprit by releasing the the door by pulling the red rope and when i push the button to engage the opener it works properly and even stops when i block the sensors. When i hook the door back up it trips and will not close and sends the 10 flashing lights. The door moves freely and there are no bad rollers. Why am i experiencing this ?
Doors – What does the 10 flash signal indicate on the garage door opener
doorsgarage
Related Topic
- Doors – Why doesn’t the Touch N Go garage door opener lift the door
- Doors – Garage Door stops and returns to original position
- Doors – Do-It garage door opener will not close without holding down the button
- Garage door not operating correctly
- Doors – Can’t reset Craftsman garage door opener
- Garage door won’t open or close when the opener light is on
Best Answer
According to this site, 10 flashes means the door sensors have detected an obstacle.
Depending on the make and model of your opener, this may be what's causing your problem.
Depending on the sensors, there might be lights on the sensors. Check the manufacturer's documentation to determine what the color and/or status of the lights should be.