I've finally gotten around to installing an outlet into my kitchen cabinets that were put in by the previous owners. Below is a picture of what I am working with.
As you can see the wire is already there but there seems to be no cutout or anything, along with a gap between the cabinet and wall. I have an Old Work box from a previous project but will that work? Or is there a box or method specifically for this kind of job? Thank you!
********************************* Completed ***********************************
Here is the finished product for anyone who is interested:
Best Answer
I would use and 4-square commercial metal box, available from the big box stores or any home center/large hardware store. Knock out a hole in the back of the box, insert a pop-in NM connector install the wire through the connector and screw the box to the back of the cabinet. Purchase a single gang mud ring. install the ring on the box. Install the receptacle and the plate.