I am looking to purchase some LED light strips, and I have seen these:
They are 7.5w, and have 150 LED lights over a span of 5m and the website states that they are 12V. But I am not sure what transformer/driver to use for these lights. The QA section, below the product description mention:
" To work out what transformer you require this is quite simple. You take the amount of LED tape you have in metres and x this by the wattage of the LED tape you have, again per metre.
For example 7m of 4.8w LED tape: 7 x 4.8w = 33.6w Therefore you would require a 60w transformer. "
So for 5 meter of 7.5watts the calculation is 5 x 7.5 = 37.5W
The website has power transformers, but at 100W and 150W, and when I rang them they were out of stock and the prices for the transformers were about 3 times what I can see on ebay.
Firstly, can I use a transformer that is producing 40W which is just above the 37.5W that I need, instead of a 150W transformer that they sell and claim is compatible for this LED strip?
Here is one transformer, that looks equivalent to the one they sell, at a relatively affordable price:
This gives me 12v x 12.5A = 150W, but I can see a 15V x 10A, which also gives 150W. Which of these is suitable for me (as they both produce the same wattage, but have different Volts/Amps), and what do the different Amps and Volts mean?
Best Answer
Yes, you can use a 40w transformer to power your 37.5w load. However, given the quality of these small power supplies, running at 90%+ all the time will cause heat and premature failure probably.
You will need to drive the LEDs at 12v. Running them at 15-18v (or anything over 12!) is a bad idea for the life of the LED. You will need to put a resistor on an 18v supply to bring it down. I'd recommend simply getting the 150w 12v supply. Wattage/amperage is different than volts, where you can use a higher powered power supply and the connected lights will only draw what they need (example: running a 12v 50w light bulb from a 12v power supply rated at 150w is fine. Running a 6v 50w bulb on the same power supply is not fine).