My house has three electric wall heaters in different rooms used to augment the gas forced air that heats the whole house.
These electric heaters are mounted on the wall, but plug into standard 120v outlets near the heaters. They have a small hot/hotter/hottest dial on the top of the heater but to turn them off they need to be unplugged.
If I wanted to operate these with a standard wall thermostat, how would I implement that setup?
Best Answer
The controlled AC outlet you linked to in the comment above seems like overkill unless you were intending to run all of them from one thermostat. I'd actually recommend putting all of them on individual thermostats so you can keep them in 3 different heating zones. Not only would this be much cheaper (the relays don't even include the thermostat), but it would be a "plug and play" solution without having to wire all of the signal wires back to the relay. I'd take a look at something like these.