I have several T5 fluorescent lights in my kitchen, serving as under-cabinet lighting. Some of them are bust, and I’d like to replace them with LED strips instead.
The power for these lights are incorporated into the walls, hooked up to standard light switches. If possible, I’d like to replace the T5 units without needing to try to pull the new cables through the units.
I have some basic electrical skills: I’ve replaced several light switches and can rewire plugs, etc. But beyond that my knowledge is relatively limited. I’m pretty confident could follow a decent guide though.
Are there LED strips available that easily plug into these connectors?
Alternatively, how would I best go about replacing these with LED lights? Is it just a case of sucking it up and pulling cable through the walls?
Best Answer
There are three ways to go.
Most of us here will recommend #1, for sheer simplicity of installation. In this case, you obtain LED retrofit "tubes" (they look like a T5 fluorescent tube, but are festooned with LEDs instead of filled with argon gas or whatever). You must be conscious of what you are buying, because there are two ways to go here:
The fourth (first, really) option is to replace the fluorescent tubes with new actual fluorescent tubes. Do this if you see black rings near the ends of the tubes, or other signs the tubes are worn out. If the tubes look healthy, the ballast may have failed - and that means don't do plug-n-play LED! T5 tubes are expensive enough that I wouldn't want to buy some just to find out. In 1-2 bulb quantity, LED "tube" replacements are cheaper than plain tubes!