Electrical – LG oven turning off and flashing “PF”

electricalkitchensoven

I have an LG L8E3092ST Oven/Range, and it's been working great for years.

However, the oven has recently started randomly turning off mid-cycle, flashing PF on the screen, and resetting the clock. Once I reset the clock, I can re-enter the cycle and resume.

The PF seems to indicate power failure, which is strange – no other appliances/lights turn off at the same time, and the oven switches instantaneously to "pf mode" – it doesn't have any period of true power failure where it's not able to turn on.

A few ideas for what might be happening:

  • Something has changed such that my electrical system can't support the oven sometimes under normal load.
  • The oven is over heating somehow.
  • My house electricity is momentarily flickering out, fast enough that I don't see the lights dim, but slow enough that the oven detects a power failure.

Would appreciate thoughts on what might be up here.

Thanks!

Best Answer

Well, it is either a whole house power problem or something specific to the range.

Incandescent lights won't show a quick power flicker, but LEDs will. Look carefully if you know when the range might "PF".

As for the range, it could be internal or it could be the range circuit. It is worth (since it is a very low cost experiment) shutting off the circuit breaker and turning it back on. There is like a 20% chance this might fix the problem if the breaker is marginal or the range needed an external power reset.

If the problem persists, do these steps from easiest to hardest:

  • Slide the range out from wall, (with breaker off) pull out plug from socket and reinsert. If anything is loose or wonky, tighten or replace.
  • Open breaker box, shut off range breaker and tighten the wire connectors. Especially the ground and neutral wires. Inspect the wire near the connectors: if any wire is not bright and shiny, cut it off, strip, and reinstall.
  • With the range pulled out and unplugged, inspect the "pigtail" (cord) connection inside the range. Tighten screws and look for signs of overheating and sparking. A replacement pigtail goes for $12–25.
  • Open the top where the control board is. Inspect for melting, soot, smoke, loose connections, etc. If all other causes are eliminated, it is probably a controller fault.
Related Topic