Electrical – Single pole three toggle switch

bathroomelectricalswitchwiring

I have a bathroom fan, heater, light combo – the switch I got has three toggle rockers on it . There's one black common screw and three silver screws on the switch. Does the black power go to the common or does the single pigtailed white go to the common and the blacks to the silver screws?

Should clarify that I have three wires from the new combo unit… one for the light &a night light, one for the heater and one for the fan

enter image description here

enter image description here

enter image description here

Best Answer

You never switch a neutral

That principle should make it clear how this should get wired. Based on your picture, this diagram should help:

Wiring Diagram

You take the hot (typically black) wire from your breaker, connect it to the single black screw on the set of switches. The black screw indicates it's the "Line Side." You take a bunch of wires and connect them to the silver screws (which indicate "Load Side"). Those wires then go to their respective connections at the light/fan/heater. There should be a single white wire to pigtail to, which is your neutral return. That should not be switched anywhere. You probably also have a chassis ground on your light/fan/heater. Be sure to wire that.