National Electrical Code 2014

Chapter 2 Wiring and Protection

Article 210 Branch Circuits

III. Required Outlets

210.52 Dwelling Unit Receptacle Outlets.

(B) Small Appliances.

(1) Receptacle Outlets Served. In the kitchen, pantry, breakfast room, dining room, or similar area of a dwelling unit, the two or more 20-ampere small-appliance branch circuits required by 210.11(C)(1) shall serve all wall and floor receptacle outlets covered by 210.52(A), all countertop outlets covered by 210.52(C), and receptacle outlets for refrigeration equipment.

(2) No Other Outlets. The two or more small-appliance branch circuits specified in 210.52(B)(1) shall have no other outlets.

(3) Kitchen Receptacle Requirements. Receptacles installed in a kitchen to serve countertop surfaces shall be supplied by not fewer than two small-appliance branch circuits, either or both of which shall also be permitted to supply receptacle outlets in the same kitchen and in other rooms specified in 210.52(B)(1). Additional small-appliance branch circuits shall be permitted to supply receptacle outlets in the kitchen and other rooms specified in 210.52(B)(1). No small-appliance branch circuit shall serve more than one kitchen.

So if this is really a "pantry", and is considered a pantry by the AHJ (Authority Having Jurisdiction). Then yes, you can supply the receptacles in the pantry with the one or more small appliance circuits.

_{NOTE: There is no official definition for "pantry" in the NEC.}

It looks like the Hue system doesn't have any candelabra sized bulbs. I don't see a Hue switch that would let you control the fixture as is. All the Hue system bulbs look large.

There are adapters that will let you use standard bulbs in an e14 socket:

I'm just not sure the bulb will fit in the fixture with the adapter - looks like it may be too small even without the adapter. It might turn out to be easier to change the fixture.

(BTW, if you are in the US, you may want to check that it's really E14 and not E17 intermediate size socket.)