I'm working with the local telecom provider to get internet access to a remote property in California.
There is a 5' tall 8×8 pressure treated post with an electric meter and some other equipment mounted to it. Electric service runs underground from a utility pole about 30' away, which is on the property.
I'd like to put an ~18 foot tall mast on this post so that the telecom provider can do an aerial drop from the utility pole to the mast. One option seems to be 1-1/2" or 2" rigid metal conduit. One issue is I can only find it locally in 10' lengths, so I'd have to use a threaded coupling to go higher, which seems like a weak spot. Also, I'm not sure if such a tall mast is going to be rigid enough to support the aerial drop. Is there some better way to do this?
Best Answer
It's probably unknowable whether or not that 8x8 post is capable of supporting an 18 foot lever, er mast, attached to it. What is the strength of the wood? How deeply is it set in the ground? Etc.
Will the telecom make any requirements as to the materials of the mast? Steel tubing and pipe can often be had in continuous lengths up to 24 feet; you could set one of these in the ground and let it be your mast.
This seems like a lot of trouble to make a drop spanning only 30 feet.
I presume you're wanting that 30 feet aerial because it crosses something that can't easily be trenched -- a driveway, perhaps. I'd find a way to make the crossing underground and let the telecom attach conduit to descend the utility pole and meet with your underground conduit.
Underground construction can be soils dependent, but some techniques I'm familiar with are these: