Am I installing this correctly?
I'm trying to install two new Leviton smart switches. Had two neutrals tied off, so pig tailed them. Does first switch need be replaced as well? It's a Lutron dimmer. Needless to say, the switches do not work.
Electrical – Trying to install Leviton smart switches replacing two older switches
electricalswitchwiring
Related Topic
- Electrical – Help with replacing 3 way switch with a smart 3 way switch
- Electrical – Replacing 3-way Dimmer with Smart Dimmer
- Electrical – Trying to install 2 smart switches but neutral wires in box are not connected
- Switch – Light switch with 3 sets of wires (not 3 way)
- Wiring – Replacing older Leviton dimmer with new Lutron different wiring
- Electrical – Odd behaviour when adding two smart dimmers in one box
- Wiring – Help: Replacing a Leviton Dimmable switch with a Regular Switch
Best Answer
Thanks for the input. I got this working. Started the sequence from right to left. The white neutrals were two wires capped off under one cap. The pigtailing worked for the neutrals to the new switches. What I had wrong was switch two was chained to switch three with a red. I ran that, which should have been hot, to the reds that are pigtailed together. Then I relooked at the wiring diagram and was able to get the switch wires adjusted. Bottom line, working well.