Electrical – What size wire for a 50amp rv receptacle from 200amp breaker box 50feet from breaker box

Here's a good calculator that will answer your question.

It says #1 copper, 2/0 for aluminum.

I'm not sure where you live but US code calls for a minimum of #8 if you're using copper or #6 if you're using aluminum. There would be no advantage in using a larger wire size in this case because at 30ft you will have negligible losses.

I don't know what your voltage is or how many phases you have but for an example of what your losses may be, I will assume a worst case scenario - 100V single phase. If you used the #6 aluminum wire, you would have a maximum of 1.72% voltage drop (loss). If you used the copper #8, you would have a maximum voltage drop of 1.66%. And just remember, when you are calculating losses (voltage drop), the higher the voltage, the better because higher voltages have less voltage drop.

Note: I use the Southwire Voltage Drop Calculator for most of my voltage drop calculations. http://www.southwire.com/support/voltage-drop-calculator.htm