I just opened my ceiling light to replace it with another mount. I see a white wire connected to 2 black wires, is that right?
The middle switch controls this ceiling light.
Electrical – Why is a white electrical wire connected to 2 black wires
ceilingelectricallight
Related Topic
- How to wire a light with multiple black/white/green wires from the ceiling
- Switch with 2 black, 2 white, 2 ground and 1 red wire connected to ceiling light and a receptacle
- Electrical – My light wiring has 2 white wires & one black wire
- Existing light fixture is connected to 2 white wires, black wires are capped
- Electrical – Ceiling box has 2 black wires and 1 white wire
- Electrical – Ceiling electrical box wires -trying to install a light fixture
- Switch – Two black wires connected into a single black wire in light switch box
- Electrical – White wire connected to two black wires and ceiling fan
Best Answer
The cable with the white wire that's connected to the two black wires is a switch loop:
Normally wires with white insulation are used only for neutrals, but code makes an exception to allow for use of the white wire in a cable used as a switch loop as a hot rather than a neutral.
If you'll look closely in the drawing, the whites used as hots are wrapped with black tape to indicate they are being used as such. The wiring in the picture in the question lack this, which is a code violation. Of course the electricity can't see the tape so it's not intrinsically unsafe. However, it can be a hazard if someone working on the wiring makes a mistake because it's not labelled as clearly as it should be.