I have replaced my bathroom extractor fan with a new model. The new model comes with a single-gang controlled switch which is wireless. You can slot it into the 1-gang box, but it doesn't need any wiring in. It takes a AAA battery.
Currently I still have the old switch in box, and the wireless just sits on the counter.
Does it violate any electrical code (I'm in CT, USA) if I just wire-nut and tape up the wires in the box, and remove the old switch? What's the best way to permanently join those wires. I'd actually like to do it all correctly.
The specific model is: https://www.homedepot.com/p/NuTone-ChromaComfort-110-CFM-Ceiling-Bathroom-Exhaust-Fan-w-Customizable-Multi-Color-LEDs-and-Smart-Phone-App-AERN110RGBL/307771471
Wall control is section 11: https://images.homedepot-static.com/catalog/pdfImages/85/85b96547-666a-4f8e-a586-4c4ecfc0b214.pdf
The wall control unit feels too big, if there's an existing switch behind the front panel.
Best Answer
With all the new technology it seems the NEC and local codes are having a hard time keeping up. This may be one example.
I'm probably over my head here but it seems logical that securely wire-nutting them would certainly be safe. They are in an accessible, approved box. There is still a switch control which has UL approval although it's technically in the fan/light assembly. I'm not suggesting you do this without checking your local and NEC codes. If they haven't dealt with this yet I would think it will be happening soon.