Flooring – Is luxury vinyl tile cost effective

tilevinyl-flooring

I am about to tile my bathroom floor, and a friend pointed me to this Luxury Vinyl Tile

Basically, I'm wondering if the money savings, and ease of installation will hurt me in the long run when I go to sell in 3 to 5 years. Or in other words, should I just suck it up and install ceramic tile.

Best Answer

I'd echo what Tester101 is saying. Going with vinyl vs cermaic is really a question of the style and price of home in relation to others in the area. Whether the price of the house is dramatically affected by this decision is hard to tell.

Does it match the rest of the house? For example, if your bathroom has a walk-in glass shower that's done in granite tile, granite counter tops, and a $600 vanity, then yes, using vinyl tile will make the whole thing look cheap. If your bathroom is more modest, then you can get away with these tiles.

Houses in a given area typically sell in a certain range. If you put several thousand dollars into high-end everything then you'll probably be able to sell at the top of that range, but no one is going to pay $350k for a house in a neighbourhood where all the houses are $220 to 260k.

That said, the straight-up price difference to DIY is not that much. I actually just installed these exact vinyl tiles in my bathroom. I went with them for a couple reasons:

  • I don't really like cold tiles, and so factoring in a in-floor heating ups the cost
  • My house does not have a lot of high-end finishes, and is not worth enough overall that I'd get a return on investment from this.
  • To put in tiles, I'd have to significantly beef up the subfloor, and I didn't want to put that much money or time in.
  • I have not tiled before, and was trying to complete this project in a weekend while the wife was gone as it's our only shower and she was not thrilled at not having a shower.

Overall I'm pretty happy with them. They do take some playing with to get them perfect (especially if your walls aren't perfectly square, like mine) - the first row is critical. I messed mine up a little bit, and there's a very slight crack between them, but it's not too bad.

I also noticed that the "grout" lines on the edges are not perfectly uniform. Some are skinnier than others. I unfortunately ended up with two planks with skinny edges butted against each other, next to two with thick edges. It's subtle, but it's the sort of thing that once you see it, you can't un-see it. If I used them again, I would take a whole bunch out of the box, and lay them out before hand to make sure the edges are balanced.

enter image description here

I am happy with the way they turned out. It's about equivalent to a normal vinyl sheet floor. It's not even comparable to the old peel-and-stick tiles. I definitely noticed in the store that there are some that don't look that nice, and if you do a bad job at installation for sure they won't look good. My first try at it, I had the first row misaligned and so by the time I was just a few planks in, it was horribly offset. I had to go back and redo it all (which luckily, you can do).

Here's part-way through the installation, to give you an idea of how they go down:

enter image description here

Related Topic