Please see the image below. I have dug down 250mm from both fences.
In order to comply with the 2.5m height limit for a flat roof structure within 2m of a boundary.
Question: Is that 2.5m measured from the immediate boundary or the actual building itself?
I would prefer to have the building 2.75m in height.
Best Answer
Based on the info in your question;
That would mean that if your structure is within the 2m of the boundary then you can not have a structure that is 2.75m in height as it would violate the code.
The 2.5m height restriction is measured from grade (the ground), to the the top of the structure. Grade would be the ground at the bottom of the fence, not from the bottom of the hole you dug. Dig the hole deeper.
Again, this is based on how your question is worded.