Gas hob without burner cover

gas

Rather than having the gas spread out by the burner cover like this:

hob

I would like to have one central flame. Can I do this by removing both the burner cover and the burner itself leaving this:

hob without cover

Firstly, would this even burn as there isn't an air inlet like the burner has. Secondly is it safe?

The reason for doing this is because I have a small radius coffee maker:
enter image description here

Best Answer

The burner and gas orifice are configured to give a proper air-fuel mixture so the appliance can safely be used to burn the gas completely into carbon dioxide and water.

With the burner removed, you won't even have the equivalent of a good propane torch or lab Etna and with an improper air-fuel mixture, soot and carbon monoxide can be part of the resultant combustion output.

Your main problem is that you're trying to use a camp stove/hiking coffee maker on a kitchen range.

This device is sized for use with alcohol stoves, butane burners, their propane canister kin or propane camp stoves which all have a small burner diameter.

enter image description here

The best bet would be a sort of conical chimney that sits over the kitchen range burner on top of the grate and funnels the heat up to a smaller grate that your coffee maker sits on. If you look through the various online camping forums, you might find someone already makes these.