Recently my dishwasher (DW) required service which meant pulling it out from under the granite counter top. The DW was secured to the counter top with two metal tabs which were glued to the counter top. The DW is operational again but I am searching for the type of glue that was used. Any suggestions?
Thanks!
Edit:
The epoxy product I ended up using is called Loctite Epoxy Five Minute Instant Mix. Before applying it, I used sand paper to remove the old epoxy. Then I simply applied the epoxy to the metal tabs, slid the dishwasher back into place with the door open, and clamped the metal tabs to the counter top. The next morning, I removed the clamps and verified the epoxy was rock solid. Rock on!
Best Answer
Two Part Epoxy.
But I wouldn't use it to hold the clip in; I'd use it to attach a tee nut, which is then fastened with a bolt to the clips on the dishwasher, facilitating removal or replacement in the future.