[hello this is my first time here I was wondering if anyone know how to remove this stem? I posted on another post that had a similar shower faucet but my post was removed
Best Answer
You'll need to grasp the valve base pipe with a pair of adjustable pliers, Channellocks, being careful not to damage the threads. Then take an adjustable wrench and fit it around the nut on the valve stem and turn the wrench counterclockwise. You can then remove the valve stem and replace the washer or replace the entire valve stem.
Find a screw that does fit the thread. You have the screw that holds the handle on, right? Take that screw to the hardware store and buy one that is threaded the same and 3-4 inches long. You can then drill a hole in a 2x4 for the screw (you'll probably need a washer) and use that 2x4 to pull the stem out.
Forget about changing the cartridge. Just open the back side of the wall and replace the whole assembly. If you have copper pipes, Shark-bite connectors make this a super easy fix nowadays.
Best Answer
You'll need to grasp the valve base pipe with a pair of adjustable pliers, Channellocks, being careful not to damage the threads. Then take an adjustable wrench and fit it around the nut on the valve stem and turn the wrench counterclockwise. You can then remove the valve stem and replace the washer or replace the entire valve stem.