HEPA Vacuums for Lead Renovate, Repair, and Paint

They make lead testing kits for this purpose.

You should ensure that you understand the correct process and procedures for painting over lead paint and that you take the proper safety precautions. The EPA has a website with lots of information on this.

Stop sanding immediately! Lead based dust is the worst threat of all. Simply painting over it to encapsulate it is the simplest measure.

To fully remove the lead paint is a big chore, and important to do right. Look for local community classes if you can - the local one here had some classes on lead certification. The short answer is, you have to seal the area off with plastic, wear a hazmat suit, scrape it all off and remove the paint from the premise, and then clean up all the dust.

You can google around and turn up tons of hits for lead removal procedures, here's the first I found and looks pretty good:

http://www.health.state.mn.us/divs/eh/lead/homes/interior.html

One tool I used in my own lead paint removal was http://www.speedheater.us/

While it is stated not to use heat guns to remove lead paint, this one is a much lower temperature version that is much safer. The fumes are still an issue so make sure there is ventilation to outside while working. (Not related to speed heater, just a happy customer)