How to add a button for a garage door opener

I purchased a Chamberlain KLIK1U 2 button universal garage door remote a little while back and remember there being a dip switch option. I'm not sure if you can program two dip switch openers to it, but it might be worth a try.

Another option which is the one I had to do is that if you have a button inside the garage that you press to open the door, you can get a pair of Chamberlain 955D receivers. It allows you to use a rolling code remote on the opener. If you used one for each opener, you could get one remote with several buttons and program it.

I hope this helps!

There are two options here:

1. You've installed it wrong, or missed something: maybe it's as simple as a switch on the unit that needs to be turned, or the remote batteries aren't in right
2. It's DOA, and no amount of re-configuring will work

You're going to have to go through the whole set-up top to bottom. Check all your connections, make sure that batteries are in right, that any fuses are installed and work. Then call Sears.