Our new-to-us 1930's home has vinyl siding, but the bottom row of the siding doesn't extend down far enough (see photo). There isn't a starter strip installed that I can find anywhere, either. It looks like the house had some kind of yellow cement board material installed over wood, originally, and then vinyl siding was installed over that about 20 years ago according to the neighbors. The wood in the photos sticks out about 1" away from the house. This isn't attractive, and more importantly, that wood is constantly getting wet from rain running down the siding. So whatever I put there would need to minimally extend down another inch or so, and preferably wrap around the exposed wood to rest against the concrete foundation. Right? The siding is sun-exposed (but in good shape otherwise) so I'm sure that I won't find an exact color match. Perhaps some kind of metal flashing is called for here? We'd like it to look better and to better protect our house. By the way, I just repaired, scraped, and painted the concrete foundation to a similar color as shown in the photo. Thanks for all of your help everyone.
How to extend existing vinyl siding downward to cover top of concrete foundation
foundationgapvinyl-siding
Related Topic
- Concrete slab up over vinyl siding
- Vinyl siding gap on corner
- Water – How to protect wooden trim that abuts a brick chimney from further water damage
- Concrete – How To Sand, Patch, Prime & Paint Exterior Foundation
- How to repair rotted sill plate on foundation concrete pony wall and adding height to concrete wall
- Best way to parge exterior stone foundation wall
- Electrical – Vinyl siding replacement and existing light fixtures
- Basement – Covering Exposed ICF and sill plate
Best Answer
I hope the sketch says it all. I can elaborate if you have questions