I have a nice chandelier that I'd like to keep, however the light sockets are deteriorating and the light bulbs don't always connect properly which causes flickering.
Any ideas on how to replace the socket?
How to fix this chandelier socket
light-fixture
Related Topic
- Plastic cage around LED GU10 socket
- Switch – Is it safe to mix LEDs and incandescents in a chandelier
- Identifying light socket in kitchen
- How to fix a socket that works and doesn’t work and has a switch in the cord. It is a small one the size of a chandelier bulb.
- Electrical – Rewiring European Chandelier
- Electrical – LED chandelier lights permanently dim
- Electrical – Light bulb sockets in ceiling fan damaged due to corrosion or arcing: Can clean to repair or must replace
Best Answer
This is a relatively easy DIY job. The sockets are most of the time removable. I can't tell exactly from your picture, but they are usually held in place by a screw below, the socket itself screws in, or the sockets sometimes have a thread on the top and a bolt holds it down. Remove the reflector/glass and take a look to see if you can figure out how to remove it. There will be two wires attached, usually with a screw terminal. Unscrew the wires and remove the socket. Go to Home Depot or your local hardware store and find an exact replacement (they are 99% of the time standard sockets). Re-attach the wires (doesn't matter if they are reversed in this case), re-attach the socket and enjoy your handy work!