I need to replace the pump on my jetted tub and the plumber requests the brand name of the bathtub in order to do so. Where do I look to see if I can locate the brand name? This tub was possibly manufactured in the mid 1990s. I can upload a picture if that helps.
How to identify the brand name of bathtub
bathtub
Related Solutions
Depending on the manufacturer, the stem should be a free replacement. It's fairly trivial to replace.
- Turn off water. (IMPORTANT!)
- Remove the large hex fitting on the face of the controller
- With vise grips, pull and wiggle the stem out.
If it's a common manufacturer, you should be able to exchange the stem at your local big box store or plumbing supplier.
Reinstalling is simply the reverse.
While picking up the stem, get an appropriate bolt to fit, and you're good to go.
Caveat: Figure out the manufacturer and call first.
Get a drain key and a crescent wrench it will expand in the hole giving you friction to turn the drain out.
Related Topic
- Ceiling – What could be leaking after installing a pet sprayer on a tub
- Fix Small Holes and Separation in Caulk Around Bathtub – How to
- Do to stop the fiberglass bathtub from squeaking
- Plumbing – How to vent a bathtub trap when the drain is routed under the tub
- Replacement for Jacuzzi tub faucet with both handles on one side
- 3 valve shower allowing flow to tub and shower
- Wiring of jacuzzi bath tub (replacing normal tub)
Best Answer
There should be an access panel of some type, to get to the electrics. Start by looking within that compartment. At the very least, there should be a label on the motor (nameplate). If you send that information to the plumber, it should give them a clue.