I have a couple pavers that have sunk in my driveway. If this was close to the edge, I’d take up a few, re-level and replace. But this is in the middle of a large expanse of pavers.
How can I pull up a few in the middle to fix this without having to pull apart 1/2 my driveway?
Best Answer
I've done it two ways. Take a coat hanger and bend a 1" 90 degree at the end of a straightened out hanger. Insert the bent edge down into the seem and twist the hanger so the 1" piece turns under the paver you want to pull up. work it back and forth with a screwdriver in the opposite edge while pulling the paver up.
My other trick was to drill a hole in the paver I wanted to remove and stick in a plastic anchor. Insert the screw, screw it in a bit and lift up. Save the dust from drilling and when you reset the paver mix it with a little silicone, clear, caulk and stuff it into the hole.