From the pictures it looks like the cracks may only be in the stucco, and the underlying structural wall may be unaffected. It's hard to tell without actually inspecting the wall, but my guess is that these cracks are only skin deep. However, you will want to treat them to prevent them from spreading.
Here are some excerpts from the article.
All buildings are subjected to a
variety of stresses in various forms
and this stress is often transferred
to the plaster stucco membrane.
Stucco
is not and never was intended to be a
structural material.
Cement stucco is
a relatively thin, brittle shell over
a framed structure and can crack if
the stresses are transferred and
overcome the strength of the plaster
membrane.
SHRINKAGE STRESS
All Portland cement
shrinks as it cures. Controlling and
minimizing that shrinkage is critical
to minimizing cracks
Shrinkage cracking
tends to have a map-like cracking
pattern.
OUTSIDE SOURCES
Structural loads,
lateral force racking, thermal
changes, wind, lumber shrinkage and
seismic events are all examples of
outside sources of stress.
HOW HARMFUL IS A HAIRLINE CRACK?
a hairline
crack does not automatically mean the
stucco is faulty, failing or will not
function for the service life of the
building.
MAKING REPAIRS
Once the decision is made to make
repairs, there are several options.
Option 1: Treat the joint with the
same finish material.
Option 2: Paint the wall or ceiling
after treating the crack with an
acrylic paint or paint designed for
stucco.
Option 3: An elastomeric paint
coating.
Option 4: Recoat the wall from
architectural break to architectural
break with the same finish material.
Option 5: A new basecoat and mesh over
the wall area.
Best Answer
I find that a urethane caulk works wonders in cases like this. It bonds like no other caulk I've used, can be had in a huge variety of custom colors, doesn't shrink much, remains very flexible, and is paintable. I'm most familiar with OSI Quad.
Be warned, it's extremely sticky--you won't get it off your clothes, and you'll have to wear it off your skin. It cures very slowly, so don't expect it to be skinned over after a few minutes like silicone or latex.
Cut a small opening on the tube and press firmly to inject the caulk deeply into the crack. Use cardboard or a plastic scraper to remove any excess, pressing very firmly to slice the extra caulk off the surface rather than smearing it wide. Ideally you'll be able to apply and tool the caulk in one pass with the tube nozzle, though.