How to remove the head off this Giacomini thermostatic radiator valve

radiatorvalve

How do I remove the head off this Giacomini thermostatic radiator valve?:

enter image description here
Click for larger view

I was expecting part of the white bit to twist off easily, to reveal the inner pin on the valve. It looks like there might be some trick to it, e.g a release mechanism by poking something through the holes. But the bottom white bit is metal and rock solid. Do I need to use wrench to unscrew it? I don't want to remove the valve (gets messy) just the valve head.

My actual problem is that the radiator has simply stopped working, but I'm told it's likely to be the thermostatic valve is broken. By removing the valve head I hope to determine whether this is the case.

Best Answer

In the technical guides for the Giacomini valves, it appears that some of the heads can be removed by unscrewing it past the the open position. Have you tried that? This is assuming that the top part on your model spins.

For other models, it appears the whole head pulls off the valve. An example is shown in this guide: http://www.giacomini.com/export/sites/default/en/download_gallery/certifications/cen_en_215_tech_doc/1257763387429_R452_1-502GB.pdf

In your photo, I can see the tops of the numbers on the valve, but not enough to compare to the various units the manufacturer produces. You might call them for more info at their support line, here:

TECHNICAL MANAGER eng. SERVILIO GIORIA tel.: 0322 923 372 servilio.gioria@giacomini.com

TECHNICAL DEPARTMENT SECRETARY

Mrs. PAOLA FRATTINI
tel.0322 923 372 - fax 0322 923 255
paola.frattini@giacomini.com
Related Topic