How to turn glossy finish matte

Getting a smooth finish without purchasing an expensive HVLP sprayer is fairly easy. Start with any good grade paint, and treat it with Flotrol acrylic additive at a rate of about 1/2 pint per gallon and mix well. If you get a real thick paint, you can increase the amount of Flowtrol up to one pint per gallon max. I use and recommend Purdy brushes. For trim, I like a sash brush, (angled style). Be sure to pick out a brush for latex paint, usually a combo of nylon and poly bristles. The ends of the bristles need to be very tapered and soft. Check out the Purdy ExtraGlides for latex.

Your technique is important also. Always try to finish with long smooth strokes only using the very tips of the bristles. Properly treated paint and the right brush used well will give you fantastic results. Good luck.

You could do the following:

1. Cut skirting board to size
2. Attached it to the wall with glue-on hook and loop tape (often called by the brand name Velcro®)
3. Cut and place a thinner quarter round or ogee molding along the top edge of the skirting, conforming it to the curves in the wall
4. Attach top molding with glue and brads, only to the skirting, being carefull not to get any glue on walls (masking tape or waxed paper can be used)
5. After glue dries, remove skirting/moulding unit
6. Paint skirting/moulding unit
7. Reinstall.