I have reversed some that have broken on the bottom to the other side, which is a temporary fix. These brackets are not flush with the back wood panel but fit over a 1" x 1/2" strip.
Any help with locating these would be awesome. I need at least 4 sets.
Thanks.
Best Answer
You may be able to find metal replacement boots from the manufacturer but it might be easiest to add some blocking as suggested by RedGrittyBrick. If that's the path you take I would suggest creating a vertical standard as opposed to horizontal applied blocking because it bears the weight of the drawer down into the floor of the cabinet instead of relying on the side wall (which may be very thin and week if the cabinets are of low quality) for structural integrity.