I am in the process repainting the refrigerator doors, and cleaning up the rust on the inside of the doors. The question is, would I increase the efficiency of operation by replacing the original fiber insulation with polyurethan foam sheet insulation? The door thickness 2 inches thick.
Increase the efficiency of a refrigerator by replacing the door insulation
insulationrefrigerator
Related Topic
- Proper order of operations for re-doing windows, stucco, and footing insulation
- Will garage door insulation improve cooling efficiency
- How are Clopay Intellicore garage door R-values so high
- Why do unused Refrigerator Appliances Grow Mold, while unused Cabinets and electronics don’t
- How does the insulation value of multiple layers of insulation compare to a single layer of the same total thickness
- Add foam board insulation to the tiny house to increase energy efficiency
Best Answer
Yes it would. Extruded (tiny bubbles, no beads) polystyrene runs about R5 per inch, compared to R3.5 for fiberglass.
However: The door is only about 1/5 of the surface of the fridge. You are going to make that 1/5 possibly have 1/3 less heat loss. So overall you are reducing it by 1/15 or about 7%
In addition transfer thorugh the walls is only part of the heat loss. More is caused by opening and closing the door. If half is caused by loss of cold air on opening the door, then your savings just dropped to 3.5 %
If it is old enough to require rust repair, it may be time for a new fridge. Fridge is one of the big power users in the house, and cooling systems have improved a lot in the last 20 years.