I have a Kenmore dryer that won't heat. Here's what I know:
240 voltage comes into dryer. Checked wires inside where power connects.
Thermostat, high limit thermostat, heating element, and fuses all have continuity
Lint tubes all clean.
Motor switch has continuity
WHAT COULD THIS BE? Maybe the control board? (although doesn't look damaged or have any black marks from a surge and dryer buttons work fine)
Best Answer
look for an thermal fuse on the heating element. If the coil over heated these thermal links pop cost from 5-15$ (as long as the heat coil is good) This may be the cause.. usually held in with screws easy to change.